Accurate species-level identification of Enterobacter cloacae complex (ECC) is crucial for related research. The classification of ECC is based on strain-to-strain phylogenetic congruence, as well as genomic features including average nucleotide identity (ANI) and digitalized DNA-DNA hybridization (dDDH). ANI and dDDH derived from whole-genome sequencing have emerged as a reliable metric for assessing genetic relatedness between genomes and are increasingly recognized as a standard for species delimitation. Up to now, there are two different classification methods for ECC. The first one categorizes E. hormaechei, a species within ECC, into five subspecies (E. hormaechei subsp. steigerwaltii, subsp. oharae, subsp. xiangfangensis, subsp. hoffmannii, and subsp. hormaechei). The second classifies E. hormaechei as three species: E. hormaechei, "E. xiangfangensis," "E. hoffmanii." While the former is well-accepted in the academic area, the latter may have a greater ability to distinguish different species of ECC. To assess the suitability of these identification criteria for clinical ECC isolates, we conducted a comprehensive analysis involving phylogenetic analysis, ANI and dDDH value alignment, virulence gene identification, and capsule typing on 256 clinical ECC strains isolated from the bloodstream. Our findings indicated that the method of categorizing E. hormaechei into five subspecies has better correlation and consistency with the molecular characteristics of clinical ECC isolates, as evidenced by phylogenetic analysis, virulence genes, and capsule typing. Therefore, the subspecies-based classification method appears more suitable for taxonomic assignments of clinical ECC isolates. IMPORTANCE: Standardizing taxonomy of the Enterobacter cloacae complex (ECC) is necessary for data integration across diverse studies. The study utilized whole-genome data to accurately identify 256 clinical ECC isolated from bloodstream infections using average nucleotide identity (ANI), digitalized DNA-DNA hybridization (dDDH), and phylogenetic analysis. Through comprehensive assessments including phylogenetic analysis, ANI and dDDH comparisons, virulence gene, and capsule typing of the 256 clinical isolates, it was concluded that the classification method based on subspecies exhibited better correlation and consistency with the molecular characteristics of clinical ECC isolates. In summary, this research contributes to the precise identification of clinical ECC at the species level and expands our understanding of ECC.
Objective: The purpose of this research was to investigate the measurements of maxillary and mandibular basal arch width in male and female with normal occlusion, and to compare dental arch width difference between normal occlusion and Classâ ¡ malocclusion groups could be helpful in orthodontic diagnosis and treatment planning. Methods: Cone-beam computed tomography (CBCT) images from 133 individuals (76 males and 57 females) with normal occlusion and 64 (25 males and 39 females) with skeletal Class II malocclusions were evaluated. The distances between canines, first molars (basal arch widths: BAW) and second molars were measured from CRs (center of resistance) of the teeth and the projection of first molars on buccal bones (WALA distance) were measured. Results: There were significant differences in male and female maxillary and mandibular dental transverse widths. The normal range of the maxilla and mandible basal bone widths differences were -2 mm-2 mm (-0.05 ± 2.17 mm). The normal occlusion and Class â ¡ groups exhibited significant differences in the width of the intercanine and first molars. Sella-nasion-A point angle (SNA) and Sella-nasion-B point angle (SNB) in the Class â ¡ male group were positively correlated with the width between the maxillary canines. For individuals with normal occlusions, the width of the mandible at the second molar was greater than that of the maxilla, so more attention should be paid to the width of the second molar when considering clinical treatment. Conclusion: Measuring the width of the maxilla and mandible basal bones from the resistance center of the first molar was a feasible and repeatable method can be used in clinical practice. The data could serve as a reference for orthodontic treatment planning. More consideration should be paid to the horizontal dental problems of the treatment plan for Class â ¡ patients. And the width of the mandible at the second molar was greater than that of the maxilla, so more attention should be paid during treatment.
With the rapid development of dental artificial intelligence systems (DAIS), a new field known as "Data Dentistry", proposed by Schwendicke in 2021, has successfully bridged the gap between medicine and engineering. This literature review introduces advanced techniques in data collection, outlines the current state of DAIS in data processing, and anticipates the future of DAIS by emphasizing the importance of more extensive and enhanced datasets. The key findings include: Versatility of imaging data: Various types of imaging data, such as X-ray, cone beam computed tomography (CBCT), facial photos, and face and oral scans, can be transformed into datasets used by artificial intelligence systems. Uniform rules in electronic dental record (EDR) systems: EDR systems require standardized rules for general use in DAIS, ensuring compatibility and seamless integration. Potential of wearable device data: Data from wearable devices, including bioelectric signals (such as electromyography), stress sensors, AR glasses, etc., show great potential for enhancing DAIS capabilities. Current DAIS performance focus: Presently, DAIS demonstrate superior performance in object location and disease diagnosis compared to information integration and clinical decision-making. Need for data quality and quantity improvement: Further improvements are needed in both the quality and quantity of data for DAIS.
Artificial Intelligence , Cone-Beam Computed Tomography , Humans , Cone-Beam Computed Tomography/methods
BACKGROUND: In the present study, the effects of distalizations of one and two molars with different step distances and attachment designs have been analyzed. METHODS: A 3D finite element analysis model has been developed in order to determine the tendency of tooth displacement and stress distribution with clear aligner treatment. RESULTS: Under the condition of single-molar distalization, when the step distance was set to 0.25 mm, the total displacement was 0.086 mm for central incisors, 0.080 mm for lateral incisors, 0.084 mm for canines, 0.102 mm for the first premolar and 0.076 mm for the second premolar. The von Mises stress of roots and the principal stress of the periodontal ligament was slightly lower than in the control group when the step distance was set to 0.130 mm. Under the condition of two-molar distalization, when the step distance was set to 0.130 mm, the total displacements for central incisors, lateral incisors and canines as well as both the first and second maxillary molars were basically the same as with a distance of 0.250 mm for one-molar distalization. In addition, when the step distance was 0.130 mm with two-molar distalization, the rotation center of the first and second molar was closer to the apex of the root indicating that the smaller step distance led to more bodily movement during the two-molar distalization. However, displacement tendencies of the first molar and the second molar were basically the same whether horizontal or vertical rectangular attachments were added. CONCLUSIONS: A step distance of moving two molars to 0.130 mm can achieve the same reaction force on the anterior teeth as moving one molar 0.250 mm without effects on horizontal or vertical rectangular attachments. CLINICAL RELEVANCE: Our results provide a theoretical basis and guidance for simultaneously moving two molars backward in clinical practice using a clear aligner.
Malocclusion , Orthodontic Appliances, Removable , Humans , Finite Element Analysis , Molar , Maxilla , Tooth Movement Techniques/methods
INTRODUCTION: This study aims to investigate the biomechanical effects of anchorage reinforcement using clear aligners (CAs) with microimplants during molar distalization. And also explores potential clinical strategies for enhancing anchorage in the sequential distalization process. METHODS: Finite element models were established to simulate the CAs, microimplants, upper dentition, periodontal ligament (PDL), and alveolar bone. In group set I, the 2nd molars underwent a distal movement of 0.25 mm in group set II, the 1st molars were distalized by 0.25 mm after the 2nd molars had been placed to a target position. Each group set consisted of three models: Model A served as the control model, Model B simulated the use of microimplants attached to the aligner through precision cuts, and Model C simulated the use of microimplants attached by buttons. Models B and C were subjected to a series of traction forces. We analyzed the effective contribution ratios of molar distalization, PDL hydrostatic stress, and von Mises stress of alveolar bone. RESULTS: The distalization of the 2nd molars accounted for a mere 52.86% of the 0.25-mm step distance without any reinforcement of anchorage. The remaining percentage was attributed to the mesial movement of anchorage teeth and other undesired movements. Models B and C exhibited an increased effective contribution ratio of molar distalization and a decreased loss of anchorage. However, there was a slight increase in the undesired movement of molar tipping and rotation. In group set II, the 2nd molar displayed a phenomenon of mesial relapse due to the reciprocal force produced by the 1st molar distalization. Moreover, the efficacy of molar distalization in terms of contribution ratio was found to be positively correlated with the magnitude of force applied. In cases where stronger anchorage reinforcement is required, precision cuts is the superior method. CONCLUSIONS: The utilization of microimplants in conjunction with CAs can facilitate the effective contribution ratio of molar distalization. However, it is important to note that complete elimination of anchorage loss is not achievable. To mitigate undesired movement, careful planning of anchorage preparation and overcorrection is recommended.
Maxilla , Orthodontic Appliances, Removable , Humans , Finite Element Analysis , Molar , Rotation , Tooth Movement Techniques/methods
INTRODUCTION: Class II elastics, in combination with clear aligners (CA), are efficient for molar distalization. However, the effects of this combination on intermaxillary molar relationship correction have yet to be investigated. This study aimed to investigate the actual contribution ratio of the maxillary and mandibular molars for total molar relationship correction during maxillary molar distalization using Class II elastics with CA and further explore therapeutic recommendations for clinical practice. METHODS: Finite element models (FEMs) were established, including the distalization of the second molars (Set I), followed by the distalization of the first molars (Set II). Model A simulated elastics attached by precision cutting, whereas Model B simulated elastics attached to buttons. Force magnitudes of 100 g, 150 g, and 200 g of force were applied. We recorded the contribution ratio of the maxillary and mandibular molars for total molar relationship correction, effective distalizing distance in 0.25 mm step distance, tipping and rotation angles, and the hydrostatic stress in the periodontal ligament. RESULTS: During maxillary molar distalization, mesialization of the mandibular molar had a notable contribution ratio for molar relationship correction. The mandibular first molar was mesialized with mesiolingual rotation tendency. Approximately half of the 0.25 mm step distance was occupied by maxillary molar distalization; the remainder was occupied by anchorage teeth mesialization and tipping or rotation. When traction forces increased, the total molar relationship correction and effective distalization increased; the mandibular molars mesialization contribution ratio also increased, as did rotation and inclination tendency. Precision cutting had a higher total molar relationship correction and more effective distalization than a button but also had a larger contribution ratio of mandibular molar mesialization and inclination or rotation. CONCLUSIONS: Mandibular molar mesialization should be considered when correcting the molar relationship using CA with intermaxillary elastics during maxillary molar distalization. It is also important to consider the anchorage teeth mesialization and undesired tipping or rotation.
Introduction: Open gingival embrasure (OGE) is a common complication in adults following clear aligner therapy and the influence of gingival or alveolar bone biotype on OGE is of great concern. Unfortunately, due to the limited number of patients with clearaligner therapy and the clinical methods to distinguish the gingival biotype of patients being invasive, it is difficult to carry out clinical studies on the gingival or alveolar bone biotype of the OGE. In the meanwhile, the detailed biomechanics of the occurrence of OGE remains unknown. The goal of this study was to establish a new model to simulate the virtual space region, namely, the OGE region, to investigate the relationship between alveolar bone biotype and the occurrence of OGE, and explore potential biomechanical factors related to OGE. Methods: The OGE region in the interproximal space was established using a filler with a very low modulus of elasticity (1 × 10-6 MPa). To illustrate the biomechanics of OGE more exhaustively, a line was created at the top of the alveolar crest along the proximal tooth root. FEA was then used to analyze the biomechanics of the surrounding tissues, the OGE region and the line at the top of the alveolar crest along the proximal tooth root of the central incisor under two different labial bone thicknesses (thick and thin) with an axial inclination of 80°, 90° and 100°. Results: During intrusion of the incisors in clear aligner therapy, as inclination increased or bone tissue became thinner, the stress in the surrounding tissues [tooth root, alveolar crest, and periodontal ligament (PDL)] was greater. In the OGE region and interproximal alveolar crest, the strain increased with increasing inclination and labial bone thinning. The results from the line at the top of the alveolar crest along the proximal tooth root showed more detailed biomechanics: In all groups, stress and strain were focused on the mesial-labial alveolar crest. Interestingly, our results also demonstrated that when OGE occurs, other complications may arise, including root resorption and bone dehiscence.
Background: Studies on Citrobacter spp. are limited, hindering our understanding of its species evolution and medical relevance. Methods: A total of 164 clinical Citrobacter spp. isolates were collected from 2017 to 2020 and identified by VITEK MALDI-TOF MS or VITEK-2 Gram-Negative Identification Card. All isolates were further analyzed by whole-genome sequencing using a HiSeq sequencer. All sequences were processed using different modules of the PGCGAP integrated package: Prokka and fastANI were used for annotation and average nucleotide identification (ANI), respectively. Antibiotic resistance and virulence genes were identified by searching CARD, ResFinder, and VFDB databases, respectively. Strains were identified using Ribosomal Multi-locus Sequence Typing (rMLST) classification based on 53 ribosome protein subunits (rps). The evolutionary relationship was analyzed using kSNP3 and visualized by iTOL editor v1_1. Genetic environments were compared by BLAST and visualized by Easyfig 2.2.5. The pathogenicity of some Citrobacter freundii isolates was confirmed by Galleria mellonella larvae infection test. Results: A total of 14 species of Citrobacter spp. were identified from 164 isolates. However, 27 and 11 isolates were incorrectly identified as C. freundii and Citrobacter braakii by MALDI-TOF MS, respectively. In addition, MS also failed to identify Citrobacter portucalensis. The virulence genes mainly encoded proteins related to flagella and iron uptake systems. Citrobacter koseri isolates (n = 28) contained two iron uptake systems, coding yersiniabactin and aerobactin, respectively. C. braakii isolates (n = 32), like Salmonella, carried Vi capsule polysaccharide synthesis genes. The yersiniabactin gene clusters identified in five C. freundii isolates are located on various ICEkp elements and have not been reported previously. Moreover, ICEkp-carrying C. freundii showed diverse pathogenic features. Conclusion: Conventional methods have significant defects in identifying Citrobacter spp. ICEkp-like elements-mediated acquirement of the Yersinia high-pathogenicity island was identified for the first time in C. freundii.
BACKGROUND: The incidence of open gingival embrasures (OGE) in patients after fixed appliance treatment is relatively high, while there are no detailed reports on patients after clear aligner therapy. Also, no clinical studies with large sample size have investigated whether interproximal enamel reduction (IPR) can actually avoid OGE. The purpose of this study was to determine the prevalence of OGE in adults after clear aligner therapy and to investigate the risk of OGE associated with IPR treatment and attachment design, focusing on the amount and distribution in mandibular anterior teeth. METHODS: Pre-treatment and post-treatment intraoral frontal photographs of 225 non-extraction patients were evaluated retrospectively for the occurrence and severity of OGE. The amount of IPR and the number of attachments in the anterior teeth from subjects after screening were recorded according to the first version of clear aligner software (Clincheck, San Jose, USA) and clinical medical documents. Logistic regression analysis was performed to identify the factors contributing to OGE. RESULTS: The incidence of OGE in non-extraction patients after clear therapy between maxillary and mandibular central incisors was 25.7% and 40.3%, respectively. IPR was not associated with the occurrence of OGE but was associated with severity (P < 0.05). The number of attachments in the anterior teeth or central incisors was significantly related to the incidence of OGE (P < 0.05) but was not associated with severity. CONCLUSION: A high rate of OGE occurs after clear aligner therapy. Clinicians should be aware of the application of IPR and the design of attachments during clear aligner therapy.
Gingiva , Orthodontic Appliances, Removable , Humans , Adult , Retrospective Studies , Dental Enamel , Incisor , Tooth Movement Techniques
Chemokine (C-X-C motif) ligand 1 (CXCL1) is mainly expressed on neutrophils and macrophages and has neutrophil chemoattractant activity. However, natural killer (NK) cells also express CXCL1. We were curious about the role played by CXCL1 in NK cells. Knocking out CXCL1 in hematopoietic cells does not affect the occurrence of NK cells; however, it does hinder NK cell maturity. CXCL1 deletion enhances the expression of immature markers and decreases the expression of functional markers in NK cells, which may explain why it hinders the maturation of NK cells. Specific knockout of CXCL1 in NK cells (CXCL1flox/flox Ncr1-cre) leads to impaired IFN-γ production and degranulation of NK cells. The lack of CXCL1 may prevent IFN-γ production and degranulation of NK cells by inhibiting the phosphorylation of AKTS473 and S6. Therefore, we have discovered a new role for CXCL1 in regulating NK cell development and immune surveillance, providing a novel theoretical basis for immunotherapy based on NK cells and potential therapeutic targets for the clinical use of NK cells. 1. Knockout of CXCL1 in hematopoietic cells inhibits the maturation of NK cells. 2. Knockout of CXCL1 in NK cells inhibits the clearance of lymphoma by NK cells and reduces IFN-γ production and CD107 expression in NK cells. 3. CXCL1 activates the PKD2/mTOR signaling pathway, and promotes the production of IFN-γ and the expression of CD107a in NK cells.
Chemokine CXCL1 , Interferon-gamma , Killer Cells, Natural , Chemokine CXCL1/metabolism , Interferon-gamma/metabolism , Signal Transduction/physiology , TOR Serine-Threonine Kinases/metabolism , Animals , Mice
Orthodontics is a discipline that is based on aesthetics. It coordinates the relationship among nose, lip, and chin through the movement of teeth and the adjustment of jaw relationship. Orthodontists need to fully analyze the patient's soft tissue profile before treatment. They also need to analyze the existing problems and those that may be solved or caused during orthodontics to guide the design of orthodontic treatment and effectively improve the clinical effect of orthodontics. This article reviews the aesthetic preconditions that guide the design of orthodontic treatment from the perspective of orthodontists.
Esthetics, Dental , Orthodontics , Humans , Orthodontists , Chin , Nose
@#Abstract: Objective To investigate the epidemiological characteristics of pathogens causing bloodstream infection in hematology patients during treatment and to compare the effects of allogeneic hematopoietic stem cell transplantation (HSCT) on them, so as to provide evidence for the diagnosis and treatment of bloodstream infection. Methods A total of 292 cases with bloodstream infection in hematology wards of the PLA General Hospital were collected from 2017 to 2021, which were divided into HSCT group and N-HSCT group according to whether performed HSCT or not. The epidemiological characteristics and influence of pathogenic bacteria in blood stream infection were analyzed and compared between the two groups. Results A total of 362 strains of pathogenic bacteria were collected from 292 cases, including 106 strains in HSCT group (84 cases) and 256 strains in N-HSCT group (208 cases). Bloodstream infections were more common in acute myeloid leukemia (130/392, 44.52%), followed by non-Hodgkin's lymphoma (74/292, 25.34%). The rate of once bloodstream infection in HSCT group was higher than that in N-HSCT Group, but the rate of twice bloodstream infections in N-HSCT group was higher. Gram-negative Bacilli were the most common pathogens (56.08%), with Escherichia coli being absolutely dominant (109/362, 30.11%), followed by Klebsiella pneumoniae (39/362, 10.77%). Coagulase-negative staphylococci (CoNS) (107/362, 29.56%) were the most common Gram-positive cocci. The detection rate of fungi in HSCT group (10/106, 9.43%) was significantly higher than that in N-HSCT Group (3.52%). The drug resistance rate of the common pathogenic bacteria was at a high level, and there was a certain proportion of multi-drug resistant strains (except for Pseudomonas aeruginosa). The resistance rates of CoNS to penicillin, gentamicin, moxifloxacin, clindamycin and rifampicin in HSCT group were higher than those in N-HSCT Group. The resistance rate of Escherichia coli to piperacillin/tazobactam, cephalosporins and etapenem in HSCT group was significantly higher than that in N-HSCT group. Conclusions The pathogens of blood stream infection in hematology patients are complicated and various. It is difficult for clinical diagnosis and treatment to detect multiple infections and multiple pathogens. HSCT patients have a higher risk of fungal bloodstream infection and more multi-drug resistant strains detected. Therefore, the identification of bloodstream infection and multi-drug resistant strains associated with HSCT patients should prompt surveillance.
INTRODUCTION: The effects of upper-molar distalization using clear aligners in combination with Class II elastics for anchorage reinforcement have not been fully investigated yet. The objective of this study is to analyze the movement and stress of the whole dentition and further explore guidelines for the selection of traction methods. METHODS: Three-dimensional (3D) finite element models are established to simulate the sequential molar distalization process, including the initial distalization of the 2nd molar (Set I) and the initial distalization of the 1st molar (Set II). Each group set features three models: a control model without Class II elastics (model A), Class II elastics attached to the tooth by buttons (model B), and Class II elastics attached to the aligner by precision cutting (model C). The 3D displacements, proclination angles, periodontal ligament (PDL) hydrostatic stress and alveolar bone von Mises stress in the anterior area are recorded. RESULTS: In all of the models, the maxillary anterior teeth are labial and mesial proclined, whereas the distal moving molars exhibit distal buccal inclination with an extrusion tendency. With the combination of Class II elastics, the anchorage was effectively reinforced; model C demonstrates superior anchorage reinforcement with lower stress distribution in comparison with model B. The upper canines in model B present an extrusion tendency. Meanwhile, the mandibular dentition in models B and C experience undesired movement tendencies with little discrepancy from each other. CONCLUSIONS: Class II elastics are generally effective for anchorage reinforcement as the upper-molar distalization is performed with clear aligners. Class II elastics attached to an aligner by precision cutting is a superior alternative for maxillary anchorage control in cases that the proclination of upper incisors and extrusion of upper canines are unwanted.
Molar , Orthodontic Appliances, Removable , Finite Element Analysis , Incisor , Periodontal Ligament
BACKGROUND: Despite the popularity of clear aligner treatment, the effect of the thickness of these aligners has not been fully investigated. The objective of this study was to assess the effects of incisor torque compensation with different thicknesses of clear aligner on the three-dimensional displacement tendency of teeth in cases of extraction. METHODS: Three-dimensional finite element models of the maxillary dentition with extracted first premolars, maxilla, periodontal ligaments, attachments, and aligners were constructed and subject to Finite Element Analysis (FEA). Two groups of models were created: (1) with 0.75 mm-thick aligners and (2) with 0.5 mm-thick aligners. A loading method was developed to simulate the action of clear aligners for the en masse retraction of the incisors. Power ridges of different heights were applied to both groups to mimic torque control, and the power ridges favoring the translation of the central incisors were selected. Then, we used ANSYS software to analyze the initial displacement of teeth and the principle stress on the PDL. RESULTS: Distal tipping, lingual tipping and extrusion of the incisors, distal tipping and extrusion of the canines, and mesial tipping and intrusion of the posterior teeth were all generated by clear aligner therapy. With the 0.5 mm-thick aligner, a power ridge of 0.7 mm could cause bodily retraction of the central incisors. With the 0.75 mm-thick aligner, a power ridge of 0.25 mm could cause translation of the central incisors. Aligner torque compensation created by the power ridges generated palatal root torque and intrusion of the incisors, intrusion of the canines, mesial tipping and the intrusion of the second premolar; these effects were more significant with a 0.75 mm-thick aligner. After torque compensation, the stress placed on the periodontal ligament of the incisors was distributed more evenly with the 0.75 mm-thick aligner. CONCLUSIONS: The torque compensation caused by power ridges can achieve incisor intrusion and palatal root torque. Appropriate torque compensation with thicker aligners should be designed to ensure bodily retraction of anterior teeth and minimize root resorption, although more attention should be paid to the anchorage control of posterior teeth in cases of extraction.
Incisor , Orthodontic Appliances, Removable , Finite Element Analysis , Torque , Tooth Movement Techniques/methods
The magnitude of the electron spin-relaxation rate Rrel of the atomic ensemble directly affects the sensitivity of the spin-exchange relaxation-free (SERF) atomic magnetometer (AM). The rapid and in-situ characterization of Rrel is of great importance. In this work, a fast extraction method of Rrel is proposed with a measurement period shorten to 0.5 s, merely detecting the transient response of SERF AM to a transverse DC excitation magnetic field after switching off the pump beam. In contrast to the conventional methods based on the measurement of the magnetic resonance linewidth, this method circumvents the involvement of optical pumping rate, and enables monitoring Rrel under arbitrary polarization, which is expected to improve the authenticity of Rrel measurement in a more convenient way.
BACKGROUND: Clear aligner treatment has become popular over recent years. It is necessary to identify methods by which we could avoid the bowing effect in extractions with clear aligner. The present study was to identify the appropriate method to design torque movement involving the upper anterior teeth of extraction cases, in order to maintain or improve the axis and torque of the upper anterior teeth with a clear aligner during movement and closure of the extraction space. RESULTS: As the height of the power ridge increased, the rotation angle of the upper central incisor in the sagittal direction decreased gradually and the location of the rotation center changed significantly; the rotation center moved in the apical direction and then changed to the crown side. The highest von-Mises stress of the upper central incisor root, periodontal ligaments, and alveolar bone, showed little change as the power ridge height increased. When the axial inclination of the upper central incisor was normal (U1-SN = 105°), the tendency of movement for the upper central incisor approached translation with a power ridge height of 0.7 mm (corresponding distorted angle: 5.8415). When the axial inclination of the upper central incisor was oversized (U1-SN = 110°), the axial inclination of the upper central incisor reduced to normal following completion of the anterior segment retraction with a power ridge of 0.4 mm (corresponding distorted angle: 3.4265). CONCLUSION: Analysis indicates that pure palatal tipping movement of the upper anterior teeth is generated without torque control, thus resulting in the bowing effect. The required torque control of the upper anterior teeth with oversize axial inclination is weaker than that of the upper anterior teeth with normal axial inclination because limited torque loss is expected for oversize axial inclination teeth. Variation sensitivity of the rotation center should be considered carefully due to biological problems when designing translation of the upper anterior teeth with normal axial inclination.
Orthodontic Appliances, Removable , Tooth Movement Techniques , Finite Element Analysis , Humans , Incisor , Tooth Movement Techniques/methods , Torque
Background: Carbapenem-resistant Klebsiella pneumoniae (CRKP) is an important pathogen causing hospital-associated outbreaks worldwide. The spread of K. pneumoniae carbapenemase-2 (KPC-2)-producing CRKP is primarily associated with sequence type (ST) 11. Methods: A total of 152 KPC-2-producing K. pneumoniae ST11 isolates were collected from the respiratory department of a tertiary care hospital in Beijing, China between 2009 and 2018. The genome sequencing of these isolates was performed on the HiSeq X Ten sequencer. Multilocus sequence typing (MLST), capsular type, plasmid replicon types and resistance genes were identified. Fifteen isolates were selected for the subsequent single-molecule real-time (SMRT) sequencing on the PacBio RS II. Alignment of the complete sequences of the plasmids carrying bla KPC-2 and/or virulence genes was performed by using BRIG and Easyfig. Results: From 2012 to 2018, the detection rate of the bla KPC-2-carrying CRKP rose rapidly from 3.3 to 28.1%. KPC-2-producing K. pneumoniae ST11 isolates were dominant in CRKP, which emerged in 2012 and caused several outbreaks. Most isolates exhibited multidrug-resistant to commonly used antibiotics, while all the isolates remained susceptible to tigecycline and polymyxin B. The single nucleotide polymorphism (SNP) analysis showed that all these 152 KPC-2-producing K. pneumoniae ST11 isolates could be divided into three genetically distinct clades (A, B, and C) and eleven subclades (A1-A9 and B1-B2). The majority belonged to clade A with KL47 serotype (n = 117, 77.0%), while KL64 and KL16 were identified in clades B and C, respectively. The bla KPC-2-carrying plasmids exhibited diverse types, namely, IncFII (pHN7A8)/IncR(6/15), IncFII (pHN7A8)/IncpA1763-KPC (5/15), IncFII (pHN7A8) (1/15), IncR (1/15), and IncpA1763-KPC (1/15). The genetic environment of bla KPC-2 showed nine IS26-based composite transposons, which had a basic core structure ISKpn27-bla KPC-2-ΔISKpn6. About 27.6% (42/152) isolates co-carried 2 to 4 virulence marker genes (namely, peg344, iucA, iroB, rmpA, and rmpA2) for hvKp strains. At least three isolates were identified to harbor virulence gene-carrying plasmids. Conclusion: KPC-2-producing K. pneumoniae ST11 was highly heterogeneous in our hospital. Transmission of these strains was mainly mediated by twelve high-risk clones. The bla KPC-2-carrying plasmids and genetic environment of bla KPC-2 genes exhibited active evolution in K. pneumoniae ST11. More attention should be paid to the tendency of KPC-2-ST11 to acquire hypervirulent plasmids.
INTRODUCTION: Physical activity (PA), sedentary behaviors (SB), sleep, and diet are related to adiposity among children and adolescents. However, there may be interactions between PA, SB, sleep, and diet, and these lifestyle behaviors may work together to affect body weight. The purpose of this study was to explore the impact of multiple lifestyle behaviors of PA, SB, sleep, and diet on childhood adiposity (body mass index z-score and overweight/obesity), and to investigate the effect of meeting multiple guidelines on adiposity among children and adolescents in China. METHODS: Cross-sectional results were based on 28,048 children aged 6-17 years from the China National Nutrition and Health Surveillance in 2010-2012. Information about PA, SB, and sleep was measured through interview-administered questionnaire. Dietary intake was assessed with food frequency questionnaire. The associations between multiple lifestyle behaviors and BMI z-score and overweight/obese were examined. RESULTS: The prevalence of overweight/obesity in the participants was 19.2%. The average time of moderate-to-vigorous PA (MVPA), leisure SB, and sleep was 76.7 ± 45.5 min, 2.9 ± 1.4 h, and 8.5 ± 1.1 h per day, respectively. The China Dietary Guidelines Index for Youth (CDGI-Y) score was 62.6 ± 11.0. Sleep duration and diet score were negative associated with BMI z-score (both p < 0.001). MVPA and SB time were positive associated with BMI z-score (p = 0.041, 0.004). Meeting the SB, sleep, and diet guidelines had a lower BMI z-score (all p < 0.01) and lower odds of overweight/obesity (all p < 0.05). There were significant interactions between PA and diet. Compared with meeting no guidelines, those who met multiple guidelines had a lower risk of overweight/obesity (all p < 0.01). The more guidelines the participants met, the lower odds of overweight/obesity (p for trend <0.001). CONCLUSIONS: PA, SB, sleep, and diet are important behaviors associated with adiposity among children and adolescents. Attaining adequate amounts of appropriate multiple behaviors provided an additional benefit. It is important for children to meet recommended behavioral guidelines or recommendations. Interventions that aim to improve awareness of and compliance with these guidelines are needed in future.
Pediatric Obesity , Sedentary Behavior , Adiposity , Adolescent , Body Mass Index , Child , China/epidemiology , Cross-Sectional Studies , Diet , Exercise , Humans , Pediatric Obesity/epidemiology , Pediatric Obesity/etiology , Sleep
Cohort study has been greatly considered and widely used in clinical research of traditional Chinese medicine in China, but it is seldom applied in the field of acupuncture and moxibustion. This paper introduces the development background, basic concepts, advantages and limitations of cohort study, analyzes the existing problems in the evaluation of acupuncture and moxibustion curative effect and development status of cohort study in the cycle of acupuncture and moxibustion, explores the feasibility and value of such method in clinical research of acupuncture and moxibustion and proposes the methodological suggestions on rigorous design, control of selective bias, control of cohort migration and reduction of loss to follow-up, aiming at broadening the new ideas andmethods for clinical research of acupuncture and moxibustion.
Acupuncture Therapy , Acupuncture , Moxibustion , China , Cohort Studies , Humans , Medicine, Chinese Traditional
BACKGROUND: In parallel with the increased prevalence of childhood overweight and obesity, the proportion of eating out in China has increased dramatically in recent years. The purpose of the study was to explore the association between frequency of eating out with overweight and obesity among Chinese children. METHODS: The representative sample was recruited from Chinese National Nutrition and Health Survey (CNNHS) in 2010-2012, which included Chinese children aged 6-17 years (7685 boys and 7576 girls). Frequency of eating out was collected by interview-administered questionnaire and categorized as: 0, 1-2 and ≥ 3 times per week. Height and weight were measured, consequently body mass index was calculated. RESULTS: The prevalence of eating out among Chinese children aged 6-17 years old was 23.2%. Children who ate out 0, 1-2, ≥3 times per week were accounted for 76.8, 10.9 and 12.3% respectively. Findings revealed that eating out three times per week or more was statistically significant associated with higher prevalence of overweight and obesity among boys (OR = 1.20,95CI:1.04-1.38) compared with those ate out less than three times per week. However, no significantly association was observed among girls (OR = 0.91, 95CI:0.78-1.01). In additional, Younger children, rural children, children from low income family, those with leisure exercises (certain physical activities regularly carried out such as swimming, walking, running, equipment fitness), leisure time sedentary behaviors (LTSB)(> 2 h/d) were relatively more likely to eat out. CONCLUSIONS: The results illustrated that eating out three times or more had a significantly positive effect on overweight and obesity among boys in China.
Overweight , Pediatric Obesity , Adolescent , Body Mass Index , Child , China/epidemiology , Cross-Sectional Studies , Female , Humans , Male , Overweight/epidemiology , Pediatric Obesity/epidemiology
